How to configure my AP work in WDS repeater mode

Note:
1. Your root router must support WDS feature.
2. Make sure your Access Point’s IP address is different from IP address of root router, but the IP address should be in same IP segment.
 
The steps are followings:

1. Type in http://192.168.0.254 in address bar in your web browser, then press Enter.

  

1. Input username and password in pop-up, both of them are admin. Then click OK to login management page.

  

1. Change your LAN IP address of access points to avoid IP conflict.

      

1. Click Radio SettingàMode Setting in the gray menu on the left, select WDS AP Repeater as work mode

  

1. Click Scan button in the main page, then the AP list appears, please find SSID of your root router, and select it, then the Mac address of your root router will be automatically filled the blanks.

 
6. Then please keep security settings be the same with the root router. Then click Apply to save the settings.
    

Posted in: Internet,Tips