3G186R-How to setup network

3G186R-How to setup this 3G router?
Product line: 3G                 Question category: Internet settings
 Steps as follows:
1. Go to 3G186R manage page and click Advanced


 2. Quick Setup->Next

3. Choose Auto APN OR Manual APN, click Next   



4. Next


5. choose connect , click Next
 

6. You can change the SSID, then click Next



7. You can change the security keyànext


8. After click save. 3G186R will reboot and you have to reconnect your WIFI

Read more »

Posted in: Wifi

3G150B-How to setup 3G Router Mode

3G150B-How to setup 3G Router Mode?
Product line: 3G                 Question category: Internet settings
 Note: 3G150B has three working modes: AP mode, Wireless Router mode, 3G Router mode. The default working mode of 3G150B is AP mode, while you insert a 3G modem to the 3G150B, it will transfer to 3G Router mode automatically. The default LAN IP address of 3G150B is 192.168.2.1. Under the 3G Router Mode, the IP address can be obtained automatically.

 The topology should be as below.



The Steps are as below:
Part 1: Get the parameters of 3G USB modem that you need type in the 3G WAN Setting.
1. Please insert the 3G modem on your computers and install the program for 3G USB Modem
2. Running the program of 3G USB Modem and connect to the Internet.
3. Record the relevant parameters that you need type in the 3G Settings page of 3G150B on the program installed for 3G modem like the picture attached:



Part 2: Configurations on the 3G150B:
1. Please plug 3G USB modem to the 3G150B, connect your computer to the LAN/WAN port of 3G150B with Ethernet cable. And the computer will obtain IP address from the router automatically.
2. Login to the management page of the 3G150B by inputting
http://192.168.2.1 in the address bar of your web browser. The default Password is “admin”.




3. In the initial page settings of 3G150B, please click “Advanced Settings”, then you can login to the homepage of the 3G150B.


4. Click Advanced SettingsàWAN Settings. In the box of the ISP, search your ISP. If you can find yours, just select it. And the relevant parameters will appear automatically. At last click OK to save. As it shown below:

  
  If you can’t find your ISP in the box of the ISP, choose OTHER. And then you should type the relevant parameters which must be match with those of your 3G USB modem. After you finish the type, click OK to save. As it shown below:



5. Please click Wireless Settings, then click Basic Settings, in the new page, please change the SSID (SSID is the name of your wireless network) and select Channel 1 or Channel 6 or Channel 11 as the Channel. Then click OK to save the Settings.


6. Click Wireless Security within Wireless Settings, choose WPA- PSK as the Security mode, AES as the WPA Algorithms, and in the box of passphrase, please input your password for your wireless network (Password should be at least 8 characters, just letters and numbers). Then click OK to save the Settings.

  
7. The settings for the 3G Router mode of 3G150B are done. You can get online with wire or wirelessly.

Read more »

Posted in: Wifi

How to set a password for wireless network of the ADSL Router

How to set a password for wireless network of the ADSL Router?
Product line: ADSL             Question category: Wireless settings
 Q: Why we need to set a password for our wireless network?
A: sometimes we don’t want others to use your wireless network then you can set a password for your wireless network

I. Physical connection:



II. Login to the management page of the router:

1、open your web browser(IE,Firefox,Safari,etc) àfind the address baràleave it blankàtype 192.168.1.1àPress enter.

(Tip: The address bar is in the most top of the web page after opening web browser).

2、Then you can see the following page, chick on Advanced Settings.

3、After clicking Advanced Settings，you will see the follow page

III、Steps to do wireless settings

1、click on wireless –>basic on the left menu ,please change SSID (it is your wireless network name)for other name, and then held on Apply

2、click on wireless –>security on the left menu ,please disable WPS setting ,select Network Authentication to WPA-PAK or WPA2-PSK,change WPA Encryption to AES, and then WPA passphrase ( please type in at least 8 numbers or letters).

IV. Connect computers to Internet wirelessly.
Please find the name of your wireless network (it is SSID which is your family name) and connect to it. It will require you to input password, please type password (It is the passphrase which was made by yourself just now.)


When your SSID (wireless network) shows connected, that means you can access to the Internet wirelessly, now you can try to unplug the cable between your computer and your tenda router to see if you can enjoy your Internet wirelessly.

Read more »

Posted in: Wifi

3G150B-How to setup Router Mode

3G150B-How to setup the Router Mode?
Product line: 3G                 Question category: Internet settings
 Note: 3G150B has three working modes: AP mode, Wireless Router mode, 3G Router mode. The default working mode of 3G150B is AP mode, while if you insert a 3G modem to the 3G150B, it will transfer to 3G Router mode automatically. The default LAN IP address of 3G150B is 192.168.2.1.Under the Wireless Router Mode, we can login to the homepage of 3G150B only by wireless signal.

The topology should be as below：


The Steps are as below:
I: change to wireless router mode
1．Connect your computer to the LAN/WAN port of 3G150B by an Ethernet cable. And then change the IP address of your computer to 192.168.2.X (X can be 2--254) manually.
2．Login the homepage of the 3G150B by inputting
http://192.168.2.1 in the address bar of your web browser. The default Password is “admin”




3．In the initial setting page of 3G150B, please click “Advanced Settings”, then you can login to the homepage of the 3G150B.



4．Click on Wireless settings->basic settings, you can see the picture as below. Please choose 11b/g/n mixed mode, change the SSID to tenda123 (the name of wireless network) and choose channel 6, then click OK to save the settings.

 
5．In the homepage of 3G150B, please click Enable Router, and tick Enable Wireless Router, then click OK. The router will reboot automatically.



6．Now we can remove the Ethernet cable between your computer and the 3G150B. We can login to the homepage of the 3G150B wirelessly. Please connect to the wireless signal of 3G150B on your laptop.



II: setup the wireless router
1. Please login to the homepage of the 3G150B again by input
http://192.168.2.1 in the address bar of your web browser. The default Password is “admin”.

2. Click Advanced SettingsàWAN settings, in the drop down menu of Mode, please choose the internet connection type of yours (if you don’t know which one you should choose, please consult Cable Company) as the picture below. And click Ok to save the settings.



3. Click on Wireless settings->wireless security, you can see the following page.


Security Mode: choose WPA-PSK
Cipher Type: choose AES
Key: set it by yourself (it is the password of your wireless network)
Then click OK to apply
4. The settings for the Wireless Router mode of 3G150B are done. You can use your computers to connect to the wireless signal of 3G150B.
II, connect computers to Internet wirelessly
Please find the name of your wireless network (it is SSID tenda123) and connect to it. It will require you to input password, please type password (It is the key which was made by yourself just now.) After that, you can enjoy the internet wirelessly.

Read more »

Posted in: Wifi